10:48 <javier__> Wizzup: ping, sorry you mentioned me the other day but I missed the notification

10:49 <javier__> Wizzup: re: what's missing in mainline for snow and peach pit / pi

10:50 <javier__> snow and peach pit don't have a working display yet, the drm bridge patches from Ajay are needed

10:52 <javier__> peach pi still doesn't have trackpad working, the atmel mxt touchscreen driver does not support the protocol used by the chip in the pi

10:52 <javier__> wifi support is missing in all the machines (snow, peach pi[t])

10:53 <javier__> Wizzup, dme: that's all I can think of, the rest of the peripherals *should* be working

10:53 <javier__> ah, I didn't look at the built-in camera neither so that's probably missing too

10:55 <Wizzup> hi

10:55 <Wizzup> cool, thanks for the update!

10:57 <javier__> Wizzup: yw

10:58 <javier__> Wizzup: Ajay's drm bridge patches seems to be in good shape now so most likely they will make it for 3.19 or 3.20

10:59 <javier__> we posted some RFC patches for trackpad support in pi, need to find time to cleanup that and post a proper patch series

11:01 <javier__> Wizzup: anyway, just saw in my backlog that you asked me and I never answered so better later than never ;)

11:04 <Wizzup> Yea, thanks. Actually just yesterday I laid out new plans for my snow, so I'll definitely try it out, possibly mainline with mentioned patches on top, or something.

11:04 <Wizzup> Wifi doesn't work yet because of some power management stuff, right?

11:11 <javier__> Wizzup: well, there is certainly an issue on Peach Pi if CPU freq is >= 1.9 GHz then you have to switch the INT voltage rail to its maximum voltage

11:12 <javier__> otherwise the mmc / sdio interface becomes unstable AFAIU

11:12 <javier__> Wizzup: but the latest series that added CPUFreq support for Exynos5420 had 1.8 GHz as the maximum operating point

11:12 <javier__> probably due the issue I just mentioned

11:13 <Wizzup> Interesting

11:13 <Wizzup> well, I'll probably start with a mainline kernel for the ifc (msm), the from there work to create mainline kernels for the exynos devices I have, and then finally update the wiki

11:13 <javier__> Wizzup: so the power managament issue you are saying does exist but shouldn't happen in mainline although the CPU freq can't also be set to the maximum supported

11:14 <Wizzup> I see -- then why does the wiki not work? (stupid question maybe)

11:14 <Wizzup> I think that quite some time ago there was already wifi for snow in the kernel, but it never worked (well)

11:15 <javier__> Wizzup: well I have to look at the Snow DTS but I'm pretty sure the Peach Pi/Pit DTS is missing bits needed by wifi

11:15 <javier__> and also the driver is not enabled in exynos_defconfig

11:15 <javier__> I've had to look at wifi support in my TODO for a long time, I may find some time this week to look at it

11:16 <javier__> at least to know what is missing, needed, etc

11:17 <Wizzup> Yeah.

11:18 <javier__> I'm leaving now, ttyl!

11:18 <Wizzup> ttyl, thx