<azonenberg>
lain, monochroma, miek: thoughts on this fixture?
<azonenberg>
lain, monochroma, miek: thoughts on this fixture?
<monochroma>
azonenberg: is there a label spot on the back for SN?
<monochroma>
azonenberg: is there a label spot on the back for SN?
<monochroma>
also, do you want to go with those SMAs (that have been giving you some problems) or go with higher end ones that should be more consistent ?
<monochroma>
also, do you want to go with those SMAs (that have been giving you some problems) or go with higher end ones that should be more consistent ?
<d1b2>
<david.lenfesty> yeah, still a little stuck, school has been especially draining. I'm planning on trying to port the graycatlabs arduino lib tomorrow and trying that out
<d1b2>
<david.lenfesty> yeah, still a little stuck, school has been especially draining. I'm planning on trying to port the graycatlabs arduino lib tomorrow and trying that out
<azonenberg>
monochroma: on the fixture, no serial number spot
<azonenberg>
monochroma: on the fixture, no serial number spot
<d1b2>
<david.lenfesty> I can probably get into town monday to send one of the boards over
<d1b2>
<david.lenfesty> I can probably get into town monday to send one of the boards over
<azonenberg>
I'll be cal'ing each fixture individually
<azonenberg>
I'll be cal'ing each fixture individually
<d1b2>
<david.lenfesty> I'm fairly convinced the USB C side is fine, just must be missing something from the firmware side of it
<d1b2>
<david.lenfesty> I'm fairly convinced the USB C side is fine, just must be missing something from the firmware side of it
<azonenberg>
and i'm sticking with these SMAs. I don't actually think they are the problem
<azonenberg>
and i'm sticking with these SMAs. I don't actually think they are the problem
<d1b2>
<david.lenfesty> I did find out I chose the wrong VBUS switch IC, turns out it's a comparator enable, not logic enable, so I would need >5V to switch it
<d1b2>
<david.lenfesty> I did find out I chose the wrong VBUS switch IC, turns out it's a comparator enable, not logic enable, so I would need >5V to switch it
<monochroma>
azonenberg: i would suggest a SN# spot so if you have issues with a fixture, you can log it, and keep track of it (and RE any issues at a later date)
<monochroma>
azonenberg: i would suggest a SN# spot so if you have issues with a fixture, you can log it, and keep track of it (and RE any issues at a later date)
<azonenberg>
I'll jsut stick a label on
<azonenberg>
I'll jsut stick a label on
<azonenberg>
But for the short term i will only have one assembled fixture at a time
<azonenberg>
But for the short term i will only have one assembled fixture at a time
<azonenberg>
i'll get 3 from oshpark, populate one, keep the other 2 in reserve
<azonenberg>
i'll get 3 from oshpark, populate one, keep the other 2 in reserve
<azonenberg>
and only populate the others if this one breaks
<azonenberg>
and only populate the others if this one breaks
<azonenberg>
i normally only serialize things where i expect to have >1 of them in existence at a time
<azonenberg>
i normally only serialize things where i expect to have >1 of them in existence at a time
<_whitenotifier-4>
[starshipraider] azonenberg pushed 1 commit to master [+5/-0/±0] https://git.io/JmHtM
<_whitenotifier-4>
[starshipraider] azonenberg pushed 1 commit to master [+5/-0/±0] https://git.io/JmHtM
<_whitenotifier-4>
[starshipraider] azonenberg c2d9ea6 - Initial AKL-PT2 test fixture
<_whitenotifier-4>
[starshipraider] azonenberg c2d9ea6 - Initial AKL-PT2 test fixture
david_ has joined #scopehal
david_ has joined #scopehal
<_whitenotifier-4>
[starshipraider] azonenberg pushed 1 commit to master [+0/-0/±1] https://git.io/JmHqV
<_whitenotifier-4>
[starshipraider] azonenberg pushed 1 commit to master [+0/-0/±1] https://git.io/JmHqV
<_whitenotifier-4>
[starshipraider] azonenberg 79e5601 - Moved terminating resistor so we don't have vias in pads
<_whitenotifier-4>
[starshipraider] azonenberg 79e5601 - Moved terminating resistor so we don't have vias in pads
<d1b2>
<david.lenfesty> azonenberg: idk how much you mind non-functional power supplies, the AP6502s seem to be super fragile, I got some more to figure out what's killing them, but I don't think I would reasonably have time to do so and ship it relatively soon
<d1b2>
<david.lenfesty> azonenberg: idk how much you mind non-functional power supplies, the AP6502s seem to be super fragile, I got some more to figure out what's killing them, but I don't think I would reasonably have time to do so and ship it relatively soon
david_ has quit [Client Quit]
david_ has quit [Client Quit]
<azonenberg>
Send what you can get, i'll do some investigation once i have hardware
<azonenberg>
Send what you can get, i'll do some investigation once i have hardware
<azonenberg>
monochroma: ok ordered that fixture, it was only $10 for 3
<azonenberg>
monochroma: ok ordered that fixture, it was only $10 for 3
<azonenberg>
need to get a bunch more SMAs but i think i will use that for my next production batch and see what happens
<azonenberg>
need to get a bunch more SMAs but i think i will use that for my next production batch and see what happens
<d1b2>
<david.lenfesty> okay sounds good. would I just send it to the address on antikernel.net?
<d1b2>
<david.lenfesty> okay sounds good. would I just send it to the address on antikernel.net?
<azonenberg>
No, that's a PO box a friend hosts for me and probably only checks once a month
<azonenberg>
No, that's a PO box a friend hosts for me and probably only checks once a month
<azonenberg>
Not sure how discord-to-irc handles PMs but DM me on twitter and i'll get you a more direct shipping address?
<azonenberg>
Not sure how discord-to-irc handles PMs but DM me on twitter and i'll get you a more direct shipping address?