01:59 <DocScrutinizer05> whatever the idea, it probably won't pan out

02:00 <DocScrutinizer05> I finally have to insert an modified stuxnet into TimRiker's server bios, since there's no other proper way to restart the bot when it got stuck in freenode mess 8like services outage today)

02:00 <DocScrutinizer05> ;-D

02:02 <DocScrutinizer05> the up- and downsides of a bot known to >150 channels

02:02 <DocScrutinizer05> since 2002

12:05 <qi-bot> [commit] Werner Almesberger: cameo/: new command "flip" to flip paths on the X or Y axis (master) http://qi-hw.com/p/cae-tools/a030eff

12:51 <qi-bot> The build was successful: http://fidelio.qi-hardware.com/~xiangfu/build-nanonote/openwrt-xburst.minimal-20120822-1032

22:10 <kristianpaul> evening

22:11 <kristianpaul> was wondering if anyone is using the navigation board from pulser as a IMU?

22:51 <wpwrak> first try at making a 3D shape that's milled from both sides: http://downloads.qi-hardware.com/people/werner/tmp/pgm-case-1-top.jpg

22:51 <wpwrak> and http://downloads.qi-hardware.com/people/werner/tmp/pgm-case-1-bot.jpg

22:53 <wpwrak> they're within about +/- 0.5 mm of each other. i calculated slack for up to 2 mm :) maybe i can improve the accuracy by adjusting the coordinates for the 2nd piece (there are two per workpiece)

23:21 <kristianpaul> not bad

23:32 <wpwrak> with two identical structures the flipping isn't to bad. i can just pick a feature (e.g., a side) in one, mark it, pick the corresponding feature on the other structure and mark it too, then flip and align the features such that 1 is where 2 was and vice versa

23:33 <wpwrak> plus, i align the workpiece with the edge of the support plate

23:33 <wpwrak> that should work for a fair number of items