03:45 <adamo130> is there anyone here that could answer a few question the rockchip kerner

03:45 <adamo130> on the rockchip kernel

03:47 <adamo130> ok ill check back later

11:37 <eballetbo[m]> mmind00: do you have a scarlet right? do you also have the servo board for it?

11:37 <mmind00> eballetbo[m]: I do have a servo-v4 for the type-c port, so yes

11:37 <mmind00> (plus the scarlet of course)

11:39 <eballetbo[m]> is the serial console plug-and-play? or do you you need toset some gpios like on Kevin?

11:41 <mmind00> eballetbo[m]: which part do you mean? i.e. bob+scarlet are the cr50-based devices so the typec-servo-thingy worked out of the box for me

11:41 <mmind00> eballetbo[m]: but you of course need dev-firmware to get bootloader serial output

12:27 <eballetbo[m]> I only want serial output for the kernel

12:28 <eballetbo[m]> is for a colleagu, I don't have such hardware, he doesn't gets output

12:42 <mmind00> eballetbo[m]: hmm, at least on my bob+scarlet it did work out of the box (but as I said dev-devices) ... the process being the same as for other CrOS devices ... starting servod with the servo-v4 xml and scarlet board and then getting the cpu-uart and such

14:31 <klemen> Hi, does anyone have any experience with eFuse writing on RK3288?

14:31 <klemen> there's not much info on this on the net

14:32 <klemen> no reference implementation or anything

14:32 <klemen> u-boot and linux only provide drivers for reading the values of eFuse