17:19 <wens> has anyone used the efuse on the rk3328? I'm reading all zeros on all four of my rk3328 boards, which are all from different vendors

18:49 <stikonas> wens: shouldn't it be all zero until you burn them

21:20 <macc24> are tjere any special kernel config options i need to set to change cpu voltage automatically on frequency change?

21:21 <macc24> i am getting weird hangs on my rk3326 board when compiling mesa on mainline kernel

21:27 <tuxd3v> macc24, are you out of memory, swapping to sdcard, or so?

21:27 <macc24> tuxd3v: no

21:27 <tuxd3v> its always a good idea to setup Zram

21:27 <macc24> the heartbeat led stops

21:27 <macc24> and no response on uart

21:29 <macc24> now i'm wondering if it's downclocking or it's that much slower than rk3288 :/

21:30 <tuxd3v> i don't know the level of support for rk3326, it could be that uart has no dma, with everything made by the cpu, and if cpu is 100% busy it would not do other things.. maybe, or it could be that CPU heat a lot, and hang..

21:31 <macc24> yeah kernel said something about no dma for uart

21:31 <tuxd3v> have you tried with a heatsink above, and a small fan?

21:31 <macc24> ughh

21:32 <macc24> i have no heatsink that small

21:32 <tuxd3v> mesa takes a while to compile

21:32 <macc24> yeah i know, but it's slower than on my rk3288 laptop

21:33 <macc24> it isn't that hot too

21:34 <tuxd3v> yeah ofcourse, rk3288 has heavy cores on it, while rk3326 has lightweight cores, so its slower..

21:44 <macc24> :/