07:35 <mcan> hipboi: ping

07:35 <hipboi> mcan, ping

07:36 <mcan> we have a problem, cant solve

07:36 <mcan> this is debug output: http://pastebin.com/S0A7y9M5

07:37 <mcan> board was working very well since ~15days, and suddenly stop working, always rebooting

07:37 <mcan> hipboi: do you have any idea about that problem?

07:46 <hipboi> mcan, what image are you using?

07:47 <hipboi> mcan, try to lower the max speed of the cpu

07:48 <mcan> kernel: radxa-stable-3.0 rootfs: linaro-nano

07:48 <mcan> hipboi: what do you mean about "try to lower the max speed of the cpu"

07:49 <hipboi> mcan, some chips can not run at 1.6G stable for a long time

07:49 <mcan> how can i reduce speed of cpu? i didnt change anything on kernel-stable-3.0, just boot logo

07:49 <hipboi> mcan, are you setting the cpu govenor at performance?

07:50 <mcan> i think we do

07:51 <hipboi> mcan, ok

07:53 <mcan> hipboi: but when we cut off power for a while, then we apply power, it should work (if there is no hardware problem). This performance running can cause hardware problems?

07:55 <hipboi> mcan, i think it's something related to the leakage of the chip

07:55 <hipboi> mcan, can you try to comment the 1608 freq

07:55 <hipboi> mcan, https://github.com/radxa/linux-rockchip/blob/radxa-stable-3.0/arch/arm/mach-rk3188/radxa-rock.c#L2458

07:56 <mcan> hipboi: i will try, thank you

10:19 <buba> hi oll

10:19 <buba> i have trable

10:19 <buba> /sys/class/display/HDMI/modes: Permission denied

10:20 <buba> echo 1280x720p-60 > /sys/class/display/HDMI/modes

10:20 <buba> eny body home????