2011-11-01 01:13 <qi-bot> [commit] Xiangfu Liu: nanonote: base-files: add hostname (master) http://qi-hw.com/p/openwrt-xburst/78cc669
2011-11-01 01:13 <qi-bot> [commit] Xiangfu Liu: xburst: update config-3.0 (master) http://qi-hw.com/p/openwrt-xburst/8106b60
2011-11-01 01:13 <qi-bot> [commit] Xiangfu Liu: config-3.0: enable FPU for debian system (master) http://qi-hw.com/p/openwrt-xburst/9912f3c
2011-11-01 03:33 <qi-bot> [commit] Xiangfu Liu: ben-wpan: add INSTALL-Ben INSTALL-PC USAGE as a doc package (master) http://qi-hw.com/p/openwrt-packages/32e497b
2011-11-01 03:33 <qi-bot> [commit] Xiangfu Liu: nanonote-files: config.full_system: include ben-wpan-doc (master) http://qi-hw.com/p/openwrt-packages/6a104ba
2011-11-01 04:47 <kristianpaul> i guess i should be carefull when soldering this m1's tp.. and add silicone to avoid disasters later ;)
2011-11-01 04:47 <kristianpaul> hum or better hack the usd to sd connector..
2011-11-01 04:48 <wpwrak> use the extension header ?
2011-11-01 04:48 <kristianpaul> i was, i mean i still
2011-11-01 04:48 <kristianpaul> but i need a gclk ping from fpga
2011-11-01 04:49 <wpwrak> and you can't send this there ?
2011-11-01 04:49 <kristianpaul> xilinx ise gets stuck with some P&R using a non gclkc pin 
2011-11-01 04:49 <kristianpaul> it is for the m1 soc
2011-11-01 04:49 <kristianpaul> i'll use the gps receivr clock to feed the whole soc :-)
2011-11-01 04:49 <wpwrak> oh :)
2011-11-01 04:51 <kristianpaul> yeah i'm not going to deal with fifos and two clock domains for now
2011-11-01 04:51 <wpwrak> ... because you found a far more brutal approach ;-))
2011-11-01 04:52 <kristianpaul> brutal? single clock is simpler tought
2011-11-01 04:53 <kristianpaul> the gclk thing well, i take it from either the memcard T19 or an adapter as i said
2011-11-01 04:53 <wpwrak> hmm. will the M1 run at the same speed ? if not, you may have trouble communicating with it afterwards
2011-11-01 04:53 <kristianpaul> ubb dont fit very well, i already tried
2011-11-01 04:54 <kristianpaul> yes sure 
2011-11-01 04:54 <wpwrak> naw, ubb needs an open holder
2011-11-01 04:55 <kristianpaul> 16.384Mhz  / 128 * 635
2011-11-01 04:57 <kristianpaul> well thats with a  PLL the DCM .. i need read more :)
2011-11-01 05:00 <kristianpaul> comunication will be only done trought uart for now, and this is parametric from what can i do understand in the core
2011-11-01 05:00 <kristianpaul> parameter default_divisor = clk_freq/baud/16;
2011-11-01 14:46 <qi-bot> [commit] Xiangfu Liu: xburst: update config-3.0 (master) http://qi-hw.com/p/openwrt-xburst/73e5dad
2011-11-01 15:52 <qi-bot> The build was successfull, see images here: http://fidelio.qi-hardware.com/~xiangfu/compile-log/openwrt-xburst.full_system-10312011-1003/