2011-06-12 00:14 <qi-bot> The build has FAILED, see log here: http://fidelio.qi-hardware.com/~xiangfu/compile-log/openwrt-xburst.full_system-06112011-0558/
2011-06-12 02:05 <qi-bot> [commit] Werner Almesberger: prod/atusb (TRX_OFF): C5 was "x" for no good reason - changed to "H" http://qi-hw.com/p/ben-wpan/fb80f51
2011-06-12 02:05 <qi-bot> [commit] Werner Almesberger: prod/atusb (TRX_OFF): walk all GPIOs. Also, use that MISO is Z if nSS = H http://qi-hw.com/p/ben-wpan/5f3cc76
2011-06-12 02:05 <qi-bot> [commit] Werner Almesberger: prod/atusb: P_ON test turned out to be unreliable - skip it for now http://qi-hw.com/p/ben-wpan/13f4a35
2011-06-12 02:05 <qi-bot> [commit] Werner Almesberger: prod/atben (gpio_ben): in TRX_OFF, use that MISO is Z if nSS = H http://qi-hw.com/p/ben-wpan/d135eb2
2011-06-12 10:29 <qi-bot> [commit] Werner Almesberger: prod/doc/setup.hmac: changed boot.hex and atusb.bin to the ce16a16 versions http://qi-hw.com/p/ben-wpan/3e37af6
2011-06-12 10:49 <qi-bot> [commit] Werner Almesberger: prod/: P_ON test for atusb can't work as intended ... because we're not in P_ON http://qi-hw.com/p/ben-wpan/39c3725
2011-06-12 12:56 <whooo> hi, I'm having a problem starting from a SD card, I get the error "VFS: Cannot open root device", but then it lists possible partitions to boot from, and mmcblk0p1 is there, what could the problem be?
2011-06-12 13:11 <larsc> wrong filesystem
2011-06-12 13:15 <whooo> I double checked that, ext2, rootfstype is set to ext2 too
2011-06-12 13:17 <whooo> ext2 is compiled into the kernel too
2011-06-12 13:47 <larsc> are there any other messages?
2011-06-12 18:13 <DocScrutinizer> yay, silent here
2011-06-12 18:20 <kristianpaul> not at all
2011-06-12 18:21 <kristianpaul> but seems i should not do decimation.. 
2011-06-12 18:22 <whooo> larsc: well, not really, first that it can't open the root device, then a list of partitions that it should be able to use and then that it can't mount the root fs
2011-06-12 18:24 <whitequark> DocScrutinizer: have you read my PM's?