2011-02-01 00:23 wolfspraul assuse you saw data I provided on "Made in  ..." issue? 2011-02-01 00:37 sure, yes 2011-02-01 00:44 nods 2011-02-01 02:42 wolfspraul: in a way, the google translation got the point more clearly: "please do not not participate" ;-) 2011-02-01 02:45 mmm not not = yes :P 2011-02-01 02:46 wpwrak: is my uart card ready yet? :P 2011-02-01 02:46 tuxbrain you must be excited by the progress wprak is making on a VERY cool card 2011-02-01 02:46 I hope you include me in the beta testers this time :) 2011-02-01 02:46 what are some yse cases you see for UART card 2011-02-01 02:47 s/yse/use 2011-02-01 02:47 mailnly Arduino comm :) 2011-02-01 02:47 nods that could be a biggie 2011-02-01 02:47 tuxbrain: not entirely yet. figuring out how much offset i need to add to the mill this time. the first runs ended up too small. they'd probably work, but didn't fit nicely. 2011-02-01 02:47 I have thought that was a great idea for a long time 2011-02-01 02:48 tuxbrain: then it's etching, soldering, and then programming. 2011-02-01 02:48 also it open the door to comm with a lot of uart ready modules , like gps and maybe gsm 2011-02-01 02:49 tuxbrain yes indeed Ben Nanonte may hit its stride as small cheap controller for a few things 2011-02-01 02:49 tuxbrain: well, flash programming to be precise. i don't care much about the actual "UART" firmware for now. all this is more an exercise for the programming - the uart is a byproduct :) 2011-02-01 02:49 tuxbrain: (open the door) and show how to interface an AVR directly with the 8:10 card interface 2011-02-01 02:49 wprak your uart card uses a small ar correct? 2011-02-01 02:49 wpwrak: do you plan to flash it trhoug NN 2011-02-01 02:50 s/ar/avr 2011-02-01 02:50 rjeffries: an ATmega48-MMU, yes 2011-02-01 02:50 tuxbrain: yup 2011-02-01 02:50 thx 2011-02-01 02:51 awesome :) 2011-02-01 02:51 tuxbrain: it's in ben-blinkenlights, directory uart/ 2011-02-01 02:52 I will take a look later on :) , today is OE +qt messing arround day 2011-02-01 02:52 After fosdem I will plan a NN lastest hacks messing arround day 2011-02-01 02:53 tuxbrain: just one day ? :) 2011-02-01 02:55 wprak does atUSB have an MCU 2011-02-01 02:56 rjeffries: it sure does: http://projects.qi-hardware.com/schhist/atusb/pdf_head/USB.pdf 2011-02-01 02:57 hmm, pin 16 looks garbled. seens that my clever "wrap long names" hack didn't work so well 2011-02-01 02:58 looks fine on screen, though 2011-02-01 02:59 why does hackable devices list the m1 as 'out of stock' * David Kuehling wrote an article about Forth on the Ben NanoNote that was published in the 4/2010 issue of German Forth magazine 4th Dimension. [http://lists.en.qi-hardware.com/pipermail/discussion/2011-January/007038.html], [http://www.forth-ev.de/repos/vd/4d2010-04.pdf article pdf] 2011-02-01 03:00 oops, here's the link http://hackable-devices.org/shop/product/milkymist-one-early-developers-kit 2011-02-01 03:03 I think I more or less finished the 02-01 news, feedback welcome 2011-02-01 03:03 http://en.qi-hardware.com/wiki/Community_news_2011-02-01 2011-02-01 03:04 wolfspraul: (hackable) maybe they sold out quickly ? 2011-02-01 03:05 (news) how about mentioning FOSDEM ? 2011-02-01 03:08 (news) hmm, "rssi traffic" isn't quite right. it's just an indication of the signal strength at the various channels. maybe "ben-wpan showing the RSSI of background traffic" ? 2011-02-01 03:09 (or "WLAN traffic", though this could be misunderstood) 2011-02-01 03:12 wolfspraul when you mention (in news) that Carlos asked "david" to leave project, it is not clear which David. s/ wpwrak: thanks that's exactly the kind of feedback I need 2011-02-01 03:14 I cannot get the wording right for all those details, unless I really dive deeper myself everywhere... 2011-02-01 03:14 i dont get it at all. how could a project be open if somebody can ask people to leave? 2011-02-01 03:14 sounds very non-open 2011-02-01 03:15 also.. android has not much to do with foss in general... dont wonder if i kick some project in the nuts here and there ;) 2011-02-01 03:15 roh: yeah that's pretty amazing, but he really did. 2011-02-01 03:15 and he also says hardware contributions/specs are not welcome? I still don't fully understand the Spanish, but it seems something like that. 2011-02-01 03:16 people applying android show very clearly that somebody has massive disconnect from that foss means. 2011-02-01 03:16 roh: well, you can always ask people to leave ... 2011-02-01 03:16 roh: don't worry about Android, it will never run on the 64 mb memory this board has, if it's ever even produced. 2011-02-01 03:16 wolfspraul: my bet is that he archieves running their pre-broken kernel 2011-02-01 03:17 cannot boot on 64mb 2011-02-01 03:17 wolfspraul: (carlos) he basically says that he doesn't want to be bothered by stupid people who don't understand how hard it is to make hardware 2011-02-01 03:18 roh: we will get through the Android dark age, I think it will end roughly like Java. 2011-02-01 03:18 wolfspraul: (rssi) maybe s/rssi/signal strength/  (unless you prefer the acronym to make it look more mysterious :) 2011-02-01 03:18 wolfspraul: ignore android. 2011-02-01 03:18 not more mysterious, but we could add a link to wikipedia or so explaining. 2011-02-01 03:18 wolfspraul: most android devices are gpl violations. we are on it. 2011-02-01 03:18 honestly, if I were behind Android, I would have a team working on an Apache-licensed microkernel replacement for the Linux kernel already 2011-02-01 03:19 the majority of android devices are basically closed and have nothing left of the openness. see them as closed source products 2011-02-01 03:19 but it's a spectactular success for Google, exactly as planned. they have excellent people working on it. too bad for the wrong cause :-) 2011-02-01 03:19 wolfspraul: (rssi) even better ! http://en.wikipedia.org/wiki/Rssi 2011-02-01 03:19 wolfspraul: it also doesnt solve any of the issues of verticals 2011-02-01 03:20 their idea was to 'make it easier' for hw vendors, coders, users 2011-02-01 03:20 its only easier for the user -> lock in 2011-02-01 03:20 yes 2011-02-01 03:20 the coder gets broken apis which change in every version like symbian or similar shit before 2011-02-01 03:20 the hw vendors still have no upgrade path. 2011-02-01 03:21 1.5/1.6 -> 2.x.. there is none. everything just throw-away code. unmergable 2011-02-01 03:21 wpwrak: beautiful, link added 2011-02-01 03:21 roh: upgrade path is to throw away device 2011-02-01 03:21 so one doesnt need to go down to licensing or java foo... 2011-02-01 03:21 cost of devices will come down, I expect most android devices to be < 50 usd within 5 years 2011-02-01 03:21 roh: yeah, the upgrade issues are just beautiful. one could forgive android a lot of the other things, but that's just embarrassing 2011-02-01 03:21 wolfspraul: doesnt make it easier for the vendor to make new products. 2011-02-01 03:22 what doesn't make it easier? throw away is the perfect upgrade path for a hardware manufacturer. 2011-02-01 03:22 wolfspraul: (throw away) so much about the high-margin end of the market :) 2011-02-01 03:22 wolfspraul: he still cannot re-use previous work and experiences. THATS what it was all about when using linux in the first place. not to need to reinvent the wheel every product. 2011-02-01 03:22 plays to the interests of both the manufacturer as well as user by bringing per-unit cost down. 2011-02-01 03:22 clears throat 2011-02-01 03:22 google failed massively there in my eyes. 2011-02-01 03:23 roh: embedded is about achieving world records in some field/spec, then being first to market with that and sell on the leadership. 2011-02-01 03:24 I think Android will work there, why not. 2011-02-01 03:24 IMO it is a waste of mental energy and perfectly good electrons to spend any time talking about Carlos here. He did what he did, he is pursuing a different Copyleft project, may 1,000 flowers bloom 2011-02-01 03:24 rjeffries: agreed. does the news item sound negative in any way? 2011-02-01 03:24 if so, it's not meant like that and we should reword it. 2011-02-01 03:25 I ws mainly reacting to in-channel talk about Carlos, clearly there is some bad feelings all the way around 2011-02-01 03:25 aren't you the one who keeps saying one can disagree respectfully? :-) 2011-02-01 03:25 who gives a damn if he does Android or something else>|. 2011-02-01 03:25 rjeffries: now you start to understand us?.... 2011-02-01 03:25 wolfspraul: maybe make "linuxencaja.net" a link ? 2011-02-01 03:25 oh absolutrely yes yes and HELL yes 2011-02-01 03:26 that is a don't care. I thought you were generous acy=tually 2011-02-01 03:26 yes, link is always good (there is one at the end of the line already, but let's make another one) 2011-02-01 03:26 wolfspraul: sure. still it doesnt get the profit of linux to either users nor to vendors. 2011-02-01 03:26 in the open source world these disagreemnets and resulting forks are not rare 2011-02-01 03:27 wolfspraul: ah ... the numbered references, right. easy to overlook :) 2011-02-01 03:27 wolfspraul: basically it doesnt get any of the strength the type of development can give. thus they failed in my eyes. 2011-02-01 03:27 since his goals are differnt that yours what the hell, 2011-02-01 03:27 wprak no I do not think that at all 2011-02-01 03:28 roh: the strength is just market success, sales, money. (and it fits with google's business model) 2011-02-01 03:28 time will tell if he has some measure of sucess. since SIE was not core to sharism, it ain't no big deal 2011-02-01 03:29 wolfspraul: well. i couldnt care less. if you ask me, google should have not used linux. spared them a lot of anger 2011-02-01 03:29 by the way (donning fireproof underwaer) as a marketing gimmick "Android Stamp" is a play on "Basic Stamp. that is not crazy 2011-02-01 03:29 rjeffries: (think that at all) err ... what ? 2011-02-01 03:29 wolfspraul: and would have spared some of their customers a call from a lawyer ;) 2011-02-01 03:29 it may be misleading until more RAM is glued on that board but it is pretty good marketing 2011-02-01 03:29 roh: yes. did you read my microkernel comment? I would do some experiments in that direction already... 2011-02-01 03:31 wpwrak: wolfspraul: ah ... the numbered references, right. easy to overlook :) // nope I saw them and clicked through;) 2011-02-01 03:31 alright, any more community news feedback? 2011-02-01 03:31 something I forgot? 2011-02-01 03:31 fosdem is a good idea, but it should be specific, with reference when/where to meet David, Sebastien, Jon 2011-02-01 03:31 wolfspraul: writing tht would been too much work. sure they gain from linux. but only on a very low technical level which a lot of embedded os can give 2011-02-01 03:32 rjeffries: if the thing doesn't actually run android, calling it "androidstamp" seems at least a bit dishonest. kinda as if i'd pick a nick "sexylolita" :) 2011-02-01 03:32 its just sad to see all the additional advantages of foss been thrown away 2011-02-01 03:33 wpwrak damn. I yjought you were an 18 yr old beautiful woman 2011-02-01 03:33 wolfspraul: (fosdem) or instructions for how to find them :) (e.g., if there are stands, are there also maps ?) 2011-02-01 03:33 Tucbrain could supply the Fosdem info with 10 minutes investment 2011-02-01 03:34 wolfspraul: about your cases.. where should i send them? 2011-02-01 03:34 i am 90% done (another 2 cases to laeser, sorting small stuff) 2011-02-01 03:34 wolfspraul in terms of community news, would it make sense to give a brief status on how atBen and atUSB are coming alonh with NO shhip date> 2011-02-01 03:35 sure everything that is well written and interesting and understandable is good. it's just about time. I wrote up this thing so far, it's a wiki... 2011-02-01 03:35 rjeffries: wolfgang doesn't like to have projections in the news :) 2011-02-01 03:35 same for fosdem 2011-02-01 03:35 yes, no announcements, I gladly leave that to others 2011-02-01 03:36 ok I was talking about letting people who do not come to irc know it is moving ali=ong 2011-02-01 03:36 not sure if the (tentative) switch to AVR is newsworthy yet. february 1st is a few days too early for this :) 2011-02-01 03:36 wpwrak: later is a better announce date anyways 2011-02-01 03:36 the wiki news page is up for edits an entire month 2011-02-01 03:36 typically nothing is written up, not even drafts/notes 2011-02-01 03:36 feb, 1st.. in egypt its revolution time ;) 2011-02-01 03:36 then I hurry something up on the last day :-) 2011-02-01 03:37 wolfspraul: you could add a varpourware/gossip column. maybe ron could be its editor ;-) 2011-02-01 03:37 sure. well written gossip is cool! 2011-02-01 03:37 but even that takes time 2011-02-01 03:37 wprak what convinced you to chnage MCU on atUSB? I am delighte dyou are likely going with AVR but wi=onder what trigged the new direction 2011-02-01 03:38 tuxbrain: if you're awake, why not tell wolfgang where people can find you (and maybe other qi-hw folks) at fosdem ? 2011-02-01 03:38 roh: send to Taiwan, but Adam is out for about a week anyway, so let's talk about that again in a few days when you have it all complete. 2011-02-01 03:38 wprak you are on thin ice dude. vice that has barely frosen ove maybe 1 cm deep at most 2011-02-01 03:38 please edit the wiki page directly, it can't be any easier anymore. 2011-02-01 03:39 I can postpone pushing out the news over rss for a few more hours, no problem. time for feedback/improvements. 2011-02-01 03:39 rjeffries: mainly avr being a more popular choice in the diy community than silabs. the chip may also be a little more efficient (has hw-assisted spi while i had to bit-bang on the silabs chip) 2011-02-01 03:39 rjeffries: question for the native speaker. is it "published an introduction to Milkymist One" or "published an introduceion for Milkymist One"? 2011-02-01 03:40 wprak works for me. I am EXCITED youmay use AVR will increase salebility IMO 2011-02-01 03:40 wolfspraul: ok. so you have no rush because of fosdem? 2011-02-01 03:40 not me, that's bearstech 2011-02-01 03:41 ok. thanks. will care about that first then ;) 2011-02-01 03:41 I do want my 10 asap, but no need to stress out on your end. 2011-02-01 03:41 woldspraul either usage is proper I prefer "tO slight over "for" 2011-02-01 03:41 once I have them, I will start selling complete products only. 2011-02-01 03:41 well, some more work needed, like a new box. 2011-02-01 03:41 "Madein Taiwan" (I could ~NOT~ resist) 2011-02-01 03:41 roh: yes definitely. bearstech first. 2011-02-01 03:42 sourcemap.org/trace/Milkymist-One 2011-02-01 03:42 I will fill in some data there, see how it works/looks 2011-02-01 03:42 I am not 100% sure about sourcemap.org yet, but we should give them the benefit of the doubt. 2011-02-01 03:42 that is very cool but will not satisfy customs. but you will learn. no problemo 2011-02-01 03:44 absolutely no problem. if a second 'made in taiwan' sticker is needed to pass certain customs, we will glue it all over for those guys, left, right, power adapter, everywhere. 2011-02-01 03:44 I am late to bed 2011-02-01 03:44 you need Made in Taiwan. You will see. 2011-02-01 03:44 rjeffries: most customers probably don't really care where it's made. they only get pissed off if it gets stuck at customs :) 2011-02-01 03:44 have fun, make a gazillion dollars 2011-02-01 03:44 that is what I am saying this is not end user issue it is customs. 2011-02-01 03:45 I put a few loose 'made in abc' stickers into the box! 2011-02-01 03:45 but I shall not beat a dead horse. nope 2011-02-01 03:45 'made in usa' 'made in germany' 'made in taiwan' 2011-02-01 03:45 how about that? 2011-02-01 03:45 that does not work as I am sure you know 2011-02-01 03:45 then it can be used as needed? 2011-02-01 03:45 :-) 2011-02-01 03:45 that would be a great way to fuck it up. 2011-02-01 03:46 new topic briefly? 2011-02-01 03:46 shoot 2011-02-01 03:46 I will be at a VC meeting Thursday, just seeing lay of the land. 2011-02-01 03:46 rjeffries: in german, we have a saying "if the donkey feels too confident, he goes on the ice" 2011-02-01 03:47 do you have a business plan you would show a potential investor? 2011-02-01 03:47 say you mainly want to commercialize MM (I have no idea) 2011-02-01 03:48 no. print one page, just write 'contrarian' in big letters. see whether there is a true contrarian among them. otherwise no need to waste time. 2011-02-01 03:48 what is investment, what is payback, how long does it take 2011-02-01 03:48 they want a nice payback as you know 2011-02-01 03:48 90% of vcs are greed driven, forget those 2011-02-01 03:48 wpwrak: hrhr 2011-02-01 03:48 they are into zynga and what not right now 2011-02-01 03:48 doesnt like VC . bad experiences 2011-02-01 03:49 wolfspraul VC busines is business. risks are high, most startups fail, they have to make good money on their wins 2011-02-01 03:49 recession? great: let's invest in gambling and alcohol, that will grow. they are even proud of such ingenuity. 2011-02-01 03:49 oh I don't like VCs either 2011-02-01 03:49 I like to work with serious investors, don't get me wrong. 2011-02-01 03:49 that is a valid position. 2011-02-01 03:49 for the most part what copyleft hardware needs is a strong marketing partner 2011-02-01 03:50 sales channel 2011-02-01 03:50 a clear vision and plan to grow a brand 2011-02-01 03:50 we have some good ingredients for that, but it lacks execution 2011-02-01 03:50 maybe wolfsproul can rob banks at night to finance dsharisim at work 2011-02-01 03:50 I am JOKING people. 2011-02-01 03:51 maybe there are vertical markets with strong brands that could be interested. mobility, medical, furniture even. 2011-02-01 03:51 angels investors want to see a simple business plan ofcourse 2011-02-01 03:51 buy low, sell high 2011-02-01 03:51 rjeffries: he does seem to show a certain destructive streak lately, doesn't he ? doesn't want money, seeks trouble with customs, ... 2011-02-01 03:51 wolfspraul those may be potential markets, 2011-02-01 03:52 rjeffries: in general: i dont like people working with not their own money. 2011-02-01 03:52 yeah I am a professional pain in the ass. and worth every cent you pay me. ;) 2011-02-01 03:52 rjeffries: so if somebody is rich and wants to invest its fine. if its a banker, i cannot care less. 2011-02-01 03:52 I am as clear as hell on the business plan, no need to kid around about it. but many vcs are simply into those viral addictive things, make money quick and run. 2011-02-01 03:52 rjeffries: strong marketing partner, that's what we need. 2011-02-01 03:53 wolfspraul: some? ALL. 2011-02-01 03:53 we only have some raw diamonds right now, nothing more. 2011-02-01 03:53 roh: i very much love to not work with my own money :) 2011-02-01 03:53 roh that's cool. works especially well if you can bootstart real cheaply and start getting positive cash flow and build unit volume so you improve gross margins 2011-02-01 03:53 wolfspraul: none of the vcs has any interrest in technology, or ideals. they only want money. 2011-02-01 03:54 rjeffries: sure. i do all my stuff from 'gain' .. i dont like having debt. 2011-02-01 03:54 rjeffries: to be fair: i see business building on debt as a bad idea in itself. 2011-02-01 03:54 roh I appreciate the zeal for ideals. and will leave now becaus emy throat is sore *ongoing cold) and it is way past my bedtim 2011-02-01 03:54 roh I pretty much agree on that principle 2011-02-01 03:54 heh. its 10 to 10am here ;) 2011-02-01 03:55 rjeffries: for a "roadmap", maybe this can give you an idea: http://downloads.qi-hardware.com/people/werner/tmp/timeline.pdf 2011-02-01 03:55 rjeffries: not that it's overly accurate or up to date. more a rough projection i did a while ago. 2011-02-01 03:55 roh forgive me, where ar eyou located? it takes me a while to remember 2011-02-01 03:55 berlin, old europe 2011-02-01 03:55 there is room for strong new businesses around free software and free data 2011-02-01 03:55 above and below software 2011-02-01 03:55 cool. 2011-02-01 03:56 agree. I have a software idea cooking as we speak. 2011-02-01 03:56 should be a no-brainer in hardware, really :-) 2011-02-01 03:56 not boiling, more of a simmer. 2011-02-01 03:56 just need to get it running. of course 1100 nanos is not enough. 2011-02-01 03:56 we'll see. 2011-02-01 03:56 rjeffries: let us know how it went. 2011-02-01 03:57 wpwrak I will grab that document and read over morning cofee 2011-02-01 03:57 roh: (work on debt) consider it a question of distributing the risk 2011-02-01 03:57 rjeffries: it's just a graph :) not a biz plan 2011-02-01 03:57 understood 2011-02-01 03:57 already opened it 2011-02-01 03:57 well, SIEv3 should be removed now :) 2011-02-01 03:58 and xue probably too. how fast things change :) 2011-02-01 03:58 since SIE is now ancient history, what happens to that camera card? that has potential 2011-02-01 03:58 is xue the camera? 2011-02-01 03:58 xue is the camera, yes 2011-02-01 03:58 sort of fell asleep 2011-02-01 03:58 you know what? that is all good. wolf can not manage that many things with his staff 2011-02-01 03:58 wpwrak: well.. i see that as a very essential groundlaying concept. 2011-02-01 03:59 wpwrak: the us and most of the western worlds business is built on debt. 2011-02-01 03:59 Ben sales could improve when it has wpwrak's RF modules and this cool new uart card 2011-02-01 04:00 and some crazy people like me dont like that and work on a debit concept. have what you invenst. invest only what you can risk. gives much more continuity and is also less math ;) 2011-02-01 04:00 agrees with rjeffries.... this happens too often lately :P 2011-02-01 04:00 hell it should be sold by Adafruit I am serious. naturally they'd need to sell Ben at a profit 2011-02-01 04:00 roh: if you make enough money, you can always buy out the others, if you want. if you don't, you'll be happy that someone with a few MUSD more of disposable money that you is footing the bill, no ? 2011-02-01 04:01 wpwrak: some millions would be nice. but please make it real money not us$ ;) 2011-02-01 04:01 tuxbrain: wolfgang needs a bit of FOSDEM info for the monthly news 2011-02-01 04:01 (fosdem) yes I will have a stand 2011-02-01 04:01 tuxbrain: how does someone who goes there find you ? 2011-02-01 04:01 ok gentlemen (and that includes YOU wpwrak;))) I amg turning out the lights. sG'nite 2011-02-01 04:01 but I don't know where is placed I will take a look and come back later 2011-02-01 04:01 tuxbrain: and what will be on display at the stand ? 2011-02-01 04:02 roh: you just have to spend 'em quickly :) 2011-02-01 04:02 NN, M1, rugged PDA, and me :) 2011-02-01 04:03 "tuxbrain with nn, mm1, and more" 2011-02-01 04:03 rjeffries: can you talk to adafruit? 2011-02-01 04:04 they have a different business model, you will find out :-) 2011-02-01 04:04 in the end we (qi/copyleft hardware) believe in the strength of free software 2011-02-01 04:04 and just sell the matching silicon/plastics for it 2011-02-01 04:04 wolfspraul: different in what way? 2011-02-01 04:06 roh: maybe their real business is the selling of canned meat of orphan baby seals cooked alive, and the rest is just a front ? ;-) 2011-02-01 04:06 not sure I never talked to them personally. my feeling is the real margins are in capacitors (for example) they can source for .1 cent and sell for 3 USD. 2011-02-01 04:07 the 'products' are just loss leaders 2011-02-01 04:07 that's how a large part of the arduino ecosystem works 2011-02-01 04:07 buy an arduino for 30 usd, that's just the start. by the time you have an installation that works you spent several hundred USD, and all of those little things you bought at huge margins. 2011-02-01 04:08 (sparkfun is big with arduino, not adafruit) 2011-02-01 04:08 anyway we need to talk to them, listen to what they say 2011-02-01 04:08 our technology is open :-) 2011-02-01 04:08 wolfspraul: so ... should i add a special antenna connector to ben-wpan ? :) 2011-02-01 04:08 wolfspraul: ack. 2011-02-01 04:08 (talks) 2011-02-01 04:09 there are some nice ones that are quite tricky to source;-) 2011-02-01 04:09 I try to sell products with the strength of the actual product, and ease of use end-user experience. 2011-02-01 04:09 not very successful to date though :-) 2011-02-01 04:10 maybe selling little things I source for 1 cent for x usd, and organizing a little party around that is a more successful model :-) 2011-02-01 04:10 wolfspraul: yeah. products still need a bit more polishing. for mm1, this means time and developers. for nanonote, it means a new device. new device means negative money ... 2011-02-01 04:29 aha ! that's why my mill produces junk. the coordinates are wrong ! now, who's doing that, and why ... 2011-02-01 04:32 kristianpaul: where can I find the datasheet of your sige evb? 2011-02-01 04:34 added fosdem tip on news, I know jon and others will be there but I don't know where they will be ... I you want to use Tuxbrain corner as qi-hardware  Meetitng Point  for me is ok :) 2011-02-01 04:39 tuxbrain: "in" Brussels ? and  sharing "a" stand ? (i think you could say "share stand", but it sounds a little odd. not sure if that's intentional.) 2011-02-01 04:39 anybody a clue of french mailfoo? 2011-02-01 04:40 wpwrak: fixed :) 2011-02-01 04:40 roh: huh? 2011-02-01 04:41 roh: le main, la lettre, le timbre, ... ? 2011-02-01 04:41 s/main/mail/ 2011-02-01 04:41 wpwrak: courrier 2011-02-01 04:42 we don't say "mail" except to refer to e-mail (people from Quebec say "courriel") 2011-02-01 04:42 lekernel: \'electronique ;-) 2011-02-01 04:43 lekernel: the quebecois speak weird :) 2011-02-01 05:04 tuxbrain: usually Hackable-devices is near the job-corner http://fosdem.org/news/job-corner 2011-02-01 05:05 the question basically is: what carrier do i use to mail the stuff to H:D ? 2011-02-01 05:30 roh: ask them ? 2011-02-01 05:38 roh: there are tons of them, depends what service you and they need 2011-02-01 05:38 you can use regular post, which is the cheapest but also the slowest 2011-02-01 05:39 or, there is DHL, Fedex, UPS and others, which are faster and provide good tracking, but are also very expensive 2011-02-01 05:47 lekernel: hm. dhl is regular post here 2011-02-01 05:47 is there any "regular" post in Germany...? :) 2011-02-01 05:47 the question is rather: does it arrive in time if i send it out tomorrow 2011-02-01 05:48 with fedex/ups definitely, with others maybe, I'm not sure 2011-02-01 05:48 mmmh 2011-02-01 05:49 i'd go with fedex or ups 2011-02-01 05:49 but ask them 2011-02-01 05:49 or find someone who's going to Brussels from Berlin... 2011-02-01 05:50 good idea. 2011-02-01 06:04 "Apache-licensed microkernel replacement for the Linux kernel already" wee :-) 2011-02-01 07:30 I pushed the 02-01 news out, thanks for all the help everybody! 2011-02-01 07:41 wolfspraul: thanks for keeping the news flowing ! 2011-02-01 07:42 nah we need to do MUCH more 2011-02-01 07:44 335 subscribers on the discussion list now, 900 on the announce list 2011-02-01 07:44 as much as the first lot of Ben! 2011-02-01 07:46 wolfspraul: (more) that i agree with :) 2011-02-01 07:48 wolfspraul: if you still have energy left for today, how about a business plan ? even if you don't like traditional investors, you'll get asked for that by anyone. (well, except if you run into a fairy that grants you three wishes, no questions asked :) should also help with your own planning. 2011-02-01 07:49 some other area that needs a bit of work seems to be what i'd call "DIY extension" 2011-02-01 07:50 seems that when someone does something hardware-wise, everyone expects the only way to benefit from this is via sharism 2011-02-01 07:50 don't understand 2011-02-01 07:50 you mean they think only sharism ltd. can manufacture the stuff? 2011-02-01 07:50 it shouldn't be like this. e.g., some things are very diy-able and within the reach of many hobbyists 2011-02-01 07:50 yes 2011-02-01 07:51 all the talk about arduino has me wondering. it's odd that everyone seems to be missing connectivity there, yet they all wait for someone else to solve these relatively simple problems 2011-02-01 07:53 starting with the breakout board. in its simplest incarnation, it would be a bare piece of pcb to which you solder stuff. 100% locally sourceable, wherever you are. as Ornotermes has proven, also DIY-able without fancy machinery. 2011-02-01 07:54 yet, where are the cool circuits with breakout boards ? maybe SPI to an arduino or whatever. 2011-02-01 07:55 I think the number of people who actually want that is very very small. 2011-02-01 07:55 so either this falls on the wrong side of people's cost/benefit calculation, or it's perceived as harder than it is, or it's not as hotly in demand as it seems, or we've simply not reached the group of people who would do such things. 2011-02-01 07:56 (small) yeah, i do't know the arduino. but there are other DIY circuits that would benefit from exactly the same technology. 2011-02-01 07:57 so why isn't anyone using their ben as an embedded controller ? i think it's great for this. 2011-02-01 07:58 where would people look for and buy an embedded controller? 2011-02-01 07:58 tuxbrain is the one that would know most about this 2011-02-01 07:58 he is the only nanonote/arduino crossover :-) 2011-02-01 07:58 wpwrak: i think the next ben ('ya' ?) should feature some extension connector 2011-02-01 07:59 for DIY projects, most people probably try to use a PC in one way or another. then have an MCU for the real work. 2011-02-01 07:59 free gpio, atleast one irq, i2c, spi.. something like that. 2011-02-01 07:59 new geek port. with a plastic cover for those not using it. 2011-02-01 07:59 wolfspraul: not the only one , but at least I admit it publicy :P 2011-02-01 07:59 the nanonote would have made a nice controlling-computer for stuff like the reprap 2011-02-01 07:59 roh: the 8:10 card is already quite nice. six signals plus power. one of the signals can be a very precise configurable clock. does it get any better ? :) 2011-02-01 08:00 wpwrak: 8:10 is to 'flimsy' for normal peoples hacking level ;) 2011-02-01 08:00 define embedded controller 2011-02-01 08:00 wpwrak: and too slow for some stuff (needs external cpu again for timing) 2011-02-01 08:01 roh: (slow) if precision timing is an issue, yes. but it also gives you an "easy" start in cases where your timing is less critical. 2011-02-01 08:03 roh: do you know how I could fill a bug or claim for the openmoko ML down ? 2011-02-01 08:03 roh: or where to do that? 2011-02-01 08:03 (flimsy) some way of locking the card maybe be useful, so that it can't get pulled/shaken out so easily. the contacts seems to be quite okay. designed for many insertions, relativelt generous spacing. could be a lot worse. 2011-02-01 08:04 zrafa: in the admin-trac 2011-02-01 08:04 tuxbrain: (embedded controller) can be at several levels. e.g., the one that talks to a sensor/actuator. 2011-02-01 08:05 zrafa: i got a mail about that but havent had time to care yet 2011-02-01 08:05 tuxbrain: or the one that talks to a lower-level processor. e.g., have the UI on the ben, let some avr worry about creating those precisely 1.537 ms pulses. 2011-02-01 08:06 I supose farnell, digikey, or mouser can have those things? isn't it? 2011-02-01 08:06 roh: but you are doing that just on your free time right? I mean, it is not a paid job. I would like to know if there is somebody in charge of that.. THe owner is still Sean or somebody else? (or the guy who pays the space for the wiki etc).. Maybe it is just a free service now? 2011-02-01 08:07 tuxbrain: well, they have eval boards. but it's more a system decision. some people just add displays and buttons to their microcontrollers and make them self-sufficient. others hook them up to the pc somehow. 2011-02-01 08:07 zrafa: sean stopped paying. basically everything that is still there is community funded effort 2011-02-01 08:08 tuxbrain: hooking up to the pc is already tricky. either you use something from ftdi or you have to deal with a "real" USB device (which is probably overwhelming for most hobbyists), or try to connect to a legacy interface, like parallel printer port or rs-232. 2011-02-01 08:08 roh: but somebody is paying yet or not? (or community has some donations maybe?). Or it is just there because you and others do a bit of free effort to keep that 2011-02-01 08:09 zrafa: i think the last bill was paid by harald 2011-02-01 08:09 roh: :( 2011-02-01 08:09 okey 2011-02-01 08:09 zrafa: so its more 'the private will of a few' than broad support 2011-02-01 08:09 roh: yeat, I see 2011-02-01 08:09 tuxbrain: the latter two are a) messy and b) increasingly difficult to do. e.g., big-banging over serial used to be possible. now that more and more systems are legacy-free (e.g., laptops), you need a usb dongle, which is very slow for bit-banging. 2011-02-01 08:10 if we find a way to fund the ~100E or so a month for the hosting would be nice. moving all the services would be loads of pain and eat that many hours that we keeping the hosting we have is 'cheaper' 2011-02-01 08:10 zrafa, roh: openmoko.org mail per se works fine. so things can't be too bad :) 2011-02-01 08:11 wpwrak: well, mailing list is not working since a lot of days ago 2011-02-01 08:11 wpwrak: i'll discuss it with gismo and see then. 2011-02-01 08:11 wpwrak: so nobody is gettings mails from community 2011-02-01 08:11 wpwrak: so all the people will simply leave 2011-02-01 08:11 wpwrak: forced 2011-02-01 08:11 zrafa: that doesn't sound good, agreed 2011-02-01 08:12 is distracted by events in egypt 2011-02-01 08:12 wpwrak: you have wiki and mail service for people with @openmoko.org address (I guess that you are the only one there :) ) 2011-02-01 08:12 wpwrak: ML are dead and projects as well 2011-02-01 08:13 wpwrak: people could use the irc a bit.. but the irc does not have all the people who was interested in openmoko .. 2011-02-01 08:13 hmm, am i ? that would be bad 2011-02-01 08:13 wpwrak: wiki is for all, mail service I mean. No sure who else uses @openmoko.org these days :) 2011-02-01 08:15 another "smart" move of Sean... they still selling something under openmoko brand? 2011-02-01 08:15 wpwrak: and community ML has been having a good amount of mails lately.. qtmoko is alive.. I saw some shr mails as well. Also the gta04 privated project.. and several people talking about different kind of things 2011-02-01 08:16 wpwrak: but now.. all of that is down.. so people enjoying yet the community is forced to leave without chance to know what to do :) 2011-02-01 08:16 roh: egypt is amazing, agreed. especially from my beijing perspective. 2011-02-01 08:17 wolfspraul: do you get aljazeera english? 2011-02-01 08:17 (having a peek at egypt) 2011-02-01 08:17 of course 'egypt' is already censored here, although the govt personnel flat out lies about it saying the "chinese internet is open" (!) 2011-02-01 08:17 they did learn the 'open' word means you are one of the good guys 2011-02-01 08:17 no matter how much blood you have on your hands 2011-02-01 08:17 chinese progress, I guess 2011-02-01 08:17 roh: no I am not following that closely. 2011-02-01 08:18 I get everything, I am on a 100% openvpn tunnel to Germany. 2011-02-01 08:18 :) 2011-02-01 08:18 and it seems to have reached jordan as well. major domino effect. 2011-02-01 08:18 but they play tricks with encrypted traffic already, all sorts of things 2011-02-01 08:18 artificial packet loss, packet delays, certain tls handshake packets just not getting through at all, etc. 2011-02-01 08:19 everything imaginable 2011-02-01 08:19 well, "the chinese internet is open" 2011-02-01 08:19 open for the criminals to manipulate, yeah 2011-02-01 08:19 hrhr 2011-02-01 08:19 zrafa: if roh and gismo don't have time to fix it, maybe they could let you have a look ? 2011-02-01 08:19 wolfspraul: though you are kind of encrypted now, don't forget about the public logging 2011-02-01 08:20 oh I am in no way at all worried about my free speech 2011-02-01 08:20 we are many more, don't forget :-) 2011-02-01 08:20 if the chinese govt decides to single me out and come after me, nothing will stop them anyway. but it won't happen, their resources are very limited. 2011-02-01 08:21 wolfspraul: i think as long as one isnt active politically you should be fine 2011-02-01 08:22 wpwrak: no sure if I have time :( .. but at least we could ask on openmoko devel irc. If somebody well known is okey to help it could be good for ML 2011-02-01 08:22 wpwrak: of course, if roh and gismo are okey with that 2011-02-01 08:22 zrafa: i am sure we can work something out. forming a new, bigger team would help, yes. 2011-02-01 08:23 still i think it would be important to guide someone in there. quite some quirks and side-effects to know about the kind of setup 2011-02-01 08:23 wolfspraul: just start blogging in chinese and they'll get very interested in you :) 2011-02-01 08:23 'tangled' sw ;I) 2011-02-01 08:24 sure, if I would blog in Chinese - not good. but even then it would take time for me to become better known, would need some of the know dissidents to link to my blog :-) 2011-02-01 08:24 also of course if I would go to tiananmen square, just with a strange smile - not good 2011-02-01 08:24 foreigners are mostly kicked out though, 5 year ban from reentry 2011-02-01 08:25 wolfspraul: nice and simple 2011-02-01 08:25 kyak: if you have time and want to read a very detailed report of how it is if the chinese govt does decide to spend some resources to keep you in check, read this http://www.hrichina.org/public/contents/press?revision_id=192059&item_id=191947 2011-02-01 08:25 but you need to be in the a-list of dissidents to deserve such treatment :-) 2011-02-01 08:26 so, seems that i've found the right correction for cutting the uart board. i'm not quite sure what sort of physics i have that -10 mil deflection to thank for, but it i just accept it without asking why, the dimensions are right. 2011-02-01 08:27 in this case Ding Zilin, a very noble retired philosophy professor whose sun was killed in 1989 2011-02-01 08:27 she would have been another good choice for nobel peace prize. she's the founder of tiananmen mothers. 2011-02-01 08:27 wolfspraul: sure, thanks.. i'll read it 2011-02-01 08:28 anyway, I'm on 100% openvpn and I'm fine :-) yes, I can confirm what the govt is saying "the chinese internet is open" 2011-02-01 08:28 (with openvpn) 2011-02-01 08:28 btw, the censorship is so bad that any foss hacker cannot work inside china without vpn 2011-02-01 08:28 wolfspraul: if you can state this on state tv and swallow the part in the parentheses, they may give you a medal :) 2011-02-01 08:28 so many mailing list archives are blocked, maybe 50% of random tech searches I would do on a regular day in google 2011-02-01 08:29 wolfspraul: it sounds like working in some big corporation :) 2011-02-01 08:29 wpwrak: oh sure. they are very smart in how to stay in power. they pride themselves on that, no sweat right now. egypt censored, done. 2011-02-01 08:30 wolfspraul: are you sure German government, or special service or whatever is not blocking anything? 2011-02-01 08:32 kyak: not possible to hide easily. germany is quite well webbed 2011-02-01 08:35 in Germany anything like this is just unimaginable 2011-02-01 08:36 that would be a huge huge scandal with lots of officials stepping down 2011-02-01 08:36 the internet shutdown in egypt also was reportet first to me by friends who 'do run tor' 2011-02-01 08:37 wolfspraul: shutting down the internet like in egypt wouldn be that easy to do and also meet much more barriers, technically as well as personal and juristic. besides that this would cripple economy in a way that it would be synonymous to a war declaration of the government against all businesses and civil society. 2011-02-01 08:55 roh: http://www.heise.de/newsticker/meldung/Oesterreich-bereitet-Kill-Switch-fuer-das-Internet-vor-Update-1181448.html 2011-02-01 08:55 wpwrak: I was thining... if you where able to flash a through a the sdio, this also means you can flash the ATmega family chips with a board exposing sdio  a breadboard and some cables? 2011-02-01 08:55 roh: kinda anachronistic ;-) 2011-02-01 08:56 thining-> thinking 2011-02-01 08:56 tuxbrain: not sdio, but a the serial programming signals, yes 2011-02-01 08:56 at least those 3V3 2011-02-01 08:56 tuxbrain: the uart board is in fact just a test for that. i'll need it for atusb. 2011-02-01 08:57 once you have done I will want to try it with a ATmega238 2011-02-01 08:57 328 2011-02-01 08:59 we have to see how to accel the 8:10 expander  DIY hacking interface 2011-02-01 09:00 wolf you have done finlly those 8:10 nude boards? 2011-02-01 09:02 tuxbrain: i was actually wondering why you're not making "8::10 nude" boards :) in the simplest case, you just need a little pcb with the 8:10 contacts on one side and some solder pads on the other side. that's a rather trivial project :) 2011-02-01 09:03 and what are we waiting for? 2011-02-01 09:05 tuxbrain: i don't know, what are you waiting for ? ;-) the design files and such have been around for months 2011-02-01 09:06 tuxbrain: wpwrak says: he wouldnt need to etch them himself if you would sell em ;) 2011-02-01 09:06 :-p 2011-02-01 09:09 roh: naw, i make mine a bit more sophisticated and put the whole circuit on the 8:10 card :) but then i'm a little obsessed with making things small. others don't necessarily have to share that obsession ;-) 2011-02-01 09:12 lastest news I have about it is that wolfgang was searching for sourcing some of them but I don't know in was state is that or if there is something like money that has stop that thing, 2011-02-01 09:13 watever please pointme to the right file I have to forward to a local board maker, to have a qoute on how much can cost me to do some. 2011-02-01 09:14 tuxbrain: wolfgang was making some boards with a cable. something like these, but nicer: http://downloads.qi-hardware.com/people/werner/f32x/c2ben-run1.jpg 2011-02-01 09:15 yes but I know nothing about this for some time, 2011-02-01 09:15 tuxbrain: http://projects.qi-hardware.com/index.php/p/kicad-libs/source/tree/master/components/8_10-card.lib 2011-02-01 09:15 tuxbrain: http://projects.qi-hardware.com/index.php/p/kicad-libs/source/tree/master/modules/8_10-card.fpd 2011-02-01 09:16 with what soft has that to be opened, rememeber I'm just a shopkeer 2011-02-01 09:16 shopkeper 2011-02-01 09:17 wpwrak: (a little obsessed with making things small): http://downloads.qi-hardware.com/people/werner/wpan/tmp/atben-20110123-side.jpg  Nahhh... ;-)) 2011-02-01 09:17 well whatever 2011-02-01 09:17 tuxbrain: (that's all. ben-blinkenlights/uart would be a recent usage example. or ben-wpan/atben, of course. the uart is slightly nicer, because i used metric grid. but this in turn means that there are rounding errors in the gerbers. not sure if your pcb maker would have a problem with that or not)) 2011-02-01 09:17 zrafa: yeah. i admit, atben is now frighteningly large :-( 2011-02-01 09:18 zrafa: if we make a 2nd generation, i want a 4-layer board and microvias. then you'll see how small this can really get :) 2011-02-01 09:18 wpwrak: WHAT??... I do not see free space on the board.. I was just kidding. I can not believe how fit are all the components (from an 0 skills guy point of view) 2011-02-01 09:19 tuxbrain: the .lib with kicad (eeschema). the .fpd first needs converting with fped, then access the resulting .mod file with kicad (pcbnew) 2011-02-01 09:19 zrafa: a lot of space is used by traces. on a multilayer board, they could be hidden :) 2011-02-01 09:19 wpwrak: if any hw hobbist would do a new atben it would be 5 times bigger 2011-02-01 09:19 I am sur 2011-02-01 09:19 e 2011-02-01 09:21 zrafa: i think you'll like the uart board :) won't take long, i hope 2011-02-01 09:21 :) 2011-02-01 09:24 tuxbrain2: your answers on ML just writting "+1" or "great :)" on the body of the mail does me to remember the manager guys of the big companies who think that doing that will improve the optimism and energy of their emploees :P 2011-02-01 09:26 tuxbrain2: and of course, those managers do not have time to write or think something better for that (and maybe they did not check the work made properly). Sorry.. I worked for some few big ones and they were doing that :P 2011-02-01 09:26 zrafa: well I was just noticing I have read this and I just remember I have not give greetings to Jane for his work 2011-02-01 09:27 zrafa: he's planning ahead for when tuxbrain will also be a big company :) 2011-02-01 09:27 and yes I'm surelly one of this kinds of bosses right now :P no time for writing more that that 2011-02-01 09:28 hehehehe bastards 2011-02-01 09:28 now Jane will stop doing nice work 2011-02-01 09:28 :D 2011-02-01 09:30 because the effect is the contrary, of course. It is not like the managers read on the "good manager" book 2011-02-01 09:30 it would actually be even nicer if she used a process that could be automated. of course, wolfgang can those two bags he's buying for USD 8 apiece to the army of chinese workers he finds right waiting at the backdoor, and then have 2 millions made for a tenth of a cent each :) 2011-02-01 09:30 zrafa: but when they retire, they write one :) 2011-02-01 09:32 I firstly see that +1 notation in the openmoko mailing list 2011-02-01 09:33 I like it and make it mine, I don't have read such good manager books.... scary 2011-02-01 09:34 so since then if +1 was so autostima destroyer ... I hould have ruined aaaloot of projects :P 2011-02-01 09:36 well, I think that it is not the "+1" itself.. the amount of words and letters written does the bad effect for EMPLOYEES 2011-02-01 09:37 zrafa: hmm, dunno. sometimes more words only make it worse :) 2011-02-01 09:37 ok I will remember to not +1ing you if you become some day my employee :) 2011-02-01 09:37 zrafa: i think the ideal situation is if manager simply let you do your job and stay quiet ;-) 2011-02-01 09:39 wpwrak: '4-layer board and microvias', you will need a microscope to work on it :-) 2011-02-01 09:39 wpwrak: I am speaking for my experience. It is not a rule, and I have not been affected never for long of ultra short two letters mails. I just saw that on employees who were working for a really long time for some goal and got that as answer form their bosses. I have not worked for a long time on just one project (no good for that) :P 2011-02-01 09:39 wpwrak: btw excellent job .. 2011-02-01 09:39 long of ultra short= long or ultra short 2011-02-01 09:40 zrafa: ah, i see. yeah, for a larger project, that's a little terse. 2011-02-01 09:41 Mauro_R: thanks :) 4 layer may actually be less crowded, because one can sends things to another layer 2011-02-01 09:58 wpwrak: the 4 layer could be applied with the same width of board? 2011-02-01 09:59 Mauro_R: width or thickness ? in any case, yes :) 2011-02-01 10:00 Mauro_R: of course, i couldn't build a multilayer board at home 2011-02-01 10:02 wpwrak: thickness is the right word, sorry :-) 2011-02-01 10:27 tuxbrain2: I made 10 8:10 breakout cables, gave away a few here and there, nothing much came from it so it fizzled out 2011-02-01 10:28 tuxbrain/tuxbrain2: I made a ubi image with a couple of games and some example files inside... 2011-02-01 10:32 wolfspraul: did you wired that 8:10 breakout cable with the RFM12B? 2011-02-01 10:33 wolfspraul: what are your plans/ideas with microkernels?,i saw your comments before 2011-02-01 10:33 ah nothing much, is that rfm12b plus 8:10 breakout a result of that then.. 2011-02-01 10:51 kristianpaul: I have no microkernel ideas, that was pure android speculation. 2011-02-01 10:52 kristianpaul: mirko vogt indeed wired up one of those cables to a hoperf module http://en.qi-hardware.com/wiki/File:Rfm12_microsd.jpg 2011-02-01 10:52 but I think it doesn't work yet 2011-02-01 10:52 kristianpaul: didn't I send one of them to you as well? 2011-02-01 10:52 I forgot where I sent them. I gave all away. Maybe I have one left for myself. 2011-02-01 11:30 yeah i got one,i think i'll wire it to my rfm12 chip aswell, in a easy removable way 2011-02-01 11:31 ah yes mirko told that time ago. bad memory i have.. 2011-02-01 11:56 hey GNUtoo :') 2011-02-01 11:56 got a nanonote? ;) 2011-02-01 11:57 no 2011-02-01 11:57 I just logged on my desktop 2011-02-01 11:57 for using pastebin 2011-02-01 11:57 it's compiling 2011-02-01 11:57 and failed 2011-02-01 11:57 so to paste the pastebin I launched xchat 2011-02-01 11:57 which connected to #qi-hardware 2011-02-01 11:58 basically we're bisecting for palm-pre which I don't have yet 2011-02-01 12:01 ah ok 2011-02-01 12:01 nice to see you around here anyway :-) 2011-02-01 12:09 note that I'm arround in #jlime on my laptopp 2011-02-01 12:11 yeap  sure :-) 2011-02-01 12:13 tuxbrain: http://downloads.qi-hardware.com/people/werner/uart/pix/ 2011-02-01 12:18 whoa, tha 3 pin conectors is giant ! 2011-02-01 12:18 conector* 2011-02-01 12:19 wpwrak: nice pics ! 2011-02-01 12:20 or i'm so exited to try to make mw own dual layer board plugable on the nanonote some day... :-) 2011-02-01 12:21 great work wpwrak !! 2011-02-01 12:22 doest it works? :-) 2011-02-01 12:22 (connector) yeah, it's a bit of a monster. at least it makes sure i have plenty of space :) 2011-02-01 12:23 (work) good question :) first, i have to write a programmer. or port an existing one. 2011-02-01 12:24 avrdude port? 2011-02-01 12:25 i need to see if the code is sufficiently reusable. would be nice if it is. 2011-02-01 12:25 of course, i need about 1% of its functionality ... 2011-02-01 12:25 :-) 2011-02-01 12:57 [commit] kyak: backgammon: set 4x8 to avoid segfault http://qi-hw.com/p/openwrt-packages/2975657 2011-02-01 13:09 kyak: want me to edit the launcher in gmenu2x? 2011-02-01 13:10 bartbes: would be great, if you have access 2011-02-01 13:10 I do 2011-02-01 13:11 [commit] bartbes: Backgammon launcher now uses backgammon.sh http://qi-hw.com/p/gmenu2x/c619594 2011-02-01 13:12 kyak: there we go 2011-02-01 13:12 bartbes: thanks! 2011-02-01 13:12 np 2011-02-01 13:13 I saw your mail on the mailing list and remembered I still had commit access 2011-02-01 13:13 http://en.qi-hardware.com/wiki/Applications looks really cool 2011-02-01 13:14 yeah 2011-02-01 13:14 smoke tests are good too, thanks Yi ! 2011-02-01 13:14 all the screenshots and descriptions.. very attractive 2011-02-01 13:18 a bookled based on that will be nice too 2011-02-01 13:18 so far ben manual is no too much informative about this kind of stuff, at least when i bought mine 2011-02-01 13:21 he, the how to exit, or xx or xxx or xxx or take battery off (:p) is really fun :') 2011-02-01 13:21 http://rojadirecta.com/ 2011-02-01 13:22 that os off topic.. but the us justice is more off topic closing the original site, when they did not do anything :) 2011-02-01 13:25 p2p dns will be fun this year :-) 2011-02-01 13:45 quit 2011-02-01 14:08 wpwrak: avrdude work on devian, it was what I used to flash the arduino... so it's only mater to port it to openwrt and I can remove that from my todo list also :P (it was very very deep in the scale but removing an items is allways source of joy :) 2011-02-01 14:08 wpwrak: better this than ..+1 to avrdude :P 2011-02-01 14:10 wpwrak, by far the most elegant uart solution until now dude :) 2011-02-01 14:18 tuxbrain: ergg,, but flash arduino wich already run a bootloader 2011-02-01 14:18 still missing first boostrap 2011-02-01 14:19 sure avrdude can do that do. 2011-02-01 14:19 you just need to choose the simpler and already supported avr programer and try make that work with the SDIO.. 2011-02-01 15:06 tuxbrain: (+1) heh :) i'll leave packing for distros to others :) all i care about if cross-compilation and finding a way for adding my low-level interface 2011-02-01 15:59 hi tuxbrain 2011-02-01 16:24 hi GNUtoo|laptop 2011-02-01 16:24 You will come  to fosdem? 2011-02-01 16:31 tuxbrain, yes 2011-02-01 16:31 that's the reason why I pinged you 2011-02-01 16:31 great :) 2011-02-01 16:31 btw do you have some sparse debug cable? 2011-02-01 16:32 for the openmoko 2011-02-01 16:32 mine broke in the transport last summer 2011-02-01 16:32 nop sorry, I have resell all OM stuff to pulster 2011-02-01 16:32 ah ok 2011-02-01 16:32 so you're focussing on nanonote now? 2011-02-01 16:32 +arduino 2011-02-01 16:33 in the free hardware part yes 2011-02-01 16:33 ah? there are other parts? 2011-02-01 16:33 rugged PDAs and Point of sales terminals with linux 2011-02-01 16:34 ok 2011-02-01 16:34 and you still want SHR on it 2011-02-01 16:34 ? 2011-02-01 16:34 on one of the pdas yes 2011-02-01 16:34 bring one to the fosdem then 2011-02-01 16:34 I could take a look 2011-02-01 16:34 sure :) 2011-02-01 16:35 basically I can evaluate it 2011-02-01 16:35 I will love to talk about it with you 2011-02-01 16:35 I think the main problem will be with the kernel 2011-02-01 16:35 evaluate means look at stuff and see the possible problems 2011-02-01 16:35 hmmm 2011-02-01 16:35 do theses device have serial? 2011-02-01 16:36 the american gues that has signed some ndas and are taking a look on what are under them and what not 2011-02-01 16:37 gues ??? 2011-02-01 16:37 usb with u-boot for reflashing but I I don't see any serial conection right now but I can ask 2011-02-01 16:37 ok 2011-02-01 16:40 what they use for kernel debugin and so 2011-02-01 16:40 ok 2011-02-01 16:40 I guess no one will want to use printks for debugging 2011-02-01 16:40 I did it for the htc dream 2011-02-01 16:40 and alsa 2011-02-01 16:40 they are very coalborative, and really wants to improve their opennes in the devices so that's why I finally decide to work with them 2011-02-01 16:40 and I don't want to do it again..... 2011-02-01 16:40 ok 2011-02-01 16:40 heheeheh I understand :) 2011-02-01 16:40 maybe we'd better talking in #openmoko-cdevel than highjacking this channel 2011-02-01 16:40 I must leave right now, but I'm glad to hear from you 2011-02-01 16:40 see you 2011-02-01 16:40 ok then a last thing 2011-02-01 16:40 if uboot has usb support 2011-02-01 16:40 you can have cdc_ethernet 2011-02-01 16:40 which is nice 2011-02-01 16:41 so you can md the dmesg buffer 2011-02-01 16:41 ok see you 2011-02-01 16:42 GNUtoo|laptop: printks are great for debugging !! :) 2011-02-01 16:42 try debugging a badly written alsa driver with printk, without prior knowledge of alsa 2011-02-01 16:43 even palm failed to fix the alsa driver I'm talking about 2011-02-01 16:43 they worked arround instead 2011-02-01 16:43 GNUtoo|laptop: bah, i've debugged ATM drivers with printk :) 2011-02-01 16:44 I've debugged a lot of stuff with printk 2011-02-01 16:44 some stuff are ok 2011-02-01 16:44 but having kgdb would be great 2011-02-01 16:45 pure luxury :) 2011-02-01 16:47 if it can save you some time, why not using it? 2011-02-01 16:47 hmm printk 2011-02-01 16:48 backtrace are usefull 2011-02-01 16:48 but imagine the power of gdb 2011-02-01 16:50 well, sometimes saves a few compile/rerun cycles 2011-02-01 16:51 yes indeed 2011-02-01 16:51 altough a few depends on the complexity of what you're debugging 2011-02-01 16:51 if it's something simple 2011-02-01 16:51 with code you know 2011-02-01 16:51 etc... 2011-02-01 16:51 you don't need kgdb 2011-02-01 16:51 but in the case of the alsa driver I debugged.... 2011-02-01 16:51 it would have been nice to have it 2011-02-01 16:57 well, i've never wrestled with alsa. maybe it is uniquely difficult ... 2011-02-01 17:07 ah, printk is a linux thing 2011-02-01 17:07 afaik is not in wikipedia and i have to use google :S 2011-02-01 17:08    printk("*** I am a kernel hacker! ***\n");  hehe 2011-02-01 17:09 hmm dmesg plus that seems usefull 2011-02-01 19:57 [commit] Werner Almesberger: uart/cam/: the usual CAM process for cutting the PCB http://qi-hw.com/p/ben-blinkenlights/f67f7a9 2011-02-01 19:57 [commit] Werner Almesberger: uart/avrdude/: patch and build instructions for avrdude http://qi-hw.com/p/ben-blinkenlights/1826cc2 2011-02-01 20:20 hullo 2011-02-01 20:48 [commit] Werner Almesberger: uart/fw/: dummy firmware with build and programming process http://qi-hw.com/p/ben-blinkenlights/979be29 2011-02-01 20:49 now i wonder if anyone has the balls to actually build this thingy ;-) 2011-02-01 20:52 wpwrak: is it easier than ledtoy? 2011-02-01 20:52 wpwrak: can I build it using the same tools as for ledtoy? 2011-02-01 20:53 wpwrak: will I use it for something? (for example to sell tuxbrain it?) 2011-02-01 20:53 can i build with out the cnc thing like in your place? 2011-02-01 20:53 zrafa: a lot less components. but they're a bit smaller. 2011-02-01 20:53 i can try source a motor tool 2011-02-01 20:53 and i'm willing to do my first order in digikey :D 2011-02-01 20:53 kristianpaul: Ornotermes has built his 8:10 card PCB without a CNC mill. so it seems to be possible :) 2011-02-01 20:53 kristianpaul: great ;) 2011-02-01 20:54 wpwrak: ya, but you'rs is double layered right? 2011-02-01 20:54 hmm wait  amin 2011-02-01 20:54 kristianpaul: you could write a little wiki page with complete instructions. Dont know anything about that.. Maybe others trying Diy would like to know 2011-02-01 20:54 kristianpaul: yes, 2 layers. but the the mechanical part is the same 2011-02-01 20:55 few holes, thats good.. 2011-02-01 20:55 kristianpaul: wiki page: (about digikey order) 2011-02-01 20:56 wpwrak which thingie 2011-02-01 20:56 rjeffries: are you reading qi-bot lines? 2011-02-01 20:56 I will go back sorry 2011-02-01 20:57 zrafa: there is boom, that helps, but yes i can document my process when i encorge my self to order 2011-02-01 20:57 wpwrak: there is  BOM isnt? 2011-02-01 20:58 wpwrak still unclear. I *think* it is the new uart 8:10 vard i sthat correct 2011-02-01 20:58 s/vard/card 2011-02-01 21:00 wpwrak: wow, you're relly good,  !! 2011-02-01 21:00 is it done? sofware part it seems.. 2011-02-01 21:00 rjeffries: the uart board 2011-02-01 21:00 kristianpaul: (bom) ah, haven't fed boom yet 2011-02-01 21:00 s/software/firmware/patches hello world ! 2011-02-01 21:00 have you made first one? 2011-02-01 21:00 or design is done 2011-02-01 21:01 he 2011-02-01 21:01 rjeffries: http://downloads.qi-hardware.com/people/werner/uart/pix/ 2011-02-01 21:01 that was for wpwrak sorry 2011-02-01 21:01 kristianpaul: the fw just blinks the led. but it shows that avrdude and the firmware build process work. 2011-02-01 21:01 thats for you  rjeffries  :-) 2011-02-01 21:02 wpwrak: yeah i noticed the blink :-) 2011-02-01 21:02 is not that the idea of the project? :-) 2011-02-01 21:02 kristianpaul: there could still be bugs in the SPI interface, the UART interface, or the clock handling. but for now, i'll assume perfection :) 2011-02-01 21:02 maybe Ornotermes can build first one outside of wpwrak's flat 2011-02-01 21:03 Ornoterms are you listening? ;) 2011-02-01 21:03 kristianpaul: i still need to check the clock. but yes, than i have all the answers i want for continuing with atusb. don't need the uart to actually work :) 2011-02-01 21:03 lemme do the bom ... 2011-02-01 21:04 oh shit dome of use want the uart to work There's theis guy some call tuxbrain or tuxbrain_away ;)) 2011-02-01 21:04 bbiab 2011-02-01 21:04 s/dome/some 2011-02-01 21:06 grmbl. just clobbered my makefile. luckily it's a really simple one. the joy of missing a git add ... 2011-02-01 21:07 git status? 2011-02-01 21:08 ah clobbered. 2011-02-01 21:11 zrafa: are you going to build one? 2011-02-01 21:11 who want Diy with sharism around ;-) 2011-02-01 21:11 well, this is a small and tiny project 2011-02-01 21:12 for potential users.. may be tuxbrain will wake up after read this ;-) 2011-02-01 21:13 git reset HEAD -- Makefile ! 2011-02-01 21:14 yeah, doesn't get much smaller. it's a bit hairy to solder, but actually not as bad as i thought 2011-02-01 21:14 kristianpaul: (makefile) naw, i had forgotten to commit it and then overwrote it by mistake. nothing git can solve. 2011-02-01 21:16 cp can do backups, just in case ;-) 2011-02-01 21:17 i already rewrote it 2011-02-01 21:40 [commit] Joachim Steiger:  more exact button assembly instructions http://qi-hw.com/p/m1/caf3271 2011-02-01 21:46 [commit] Werner Almesberger: uart/Makefile: forgot to commit this one. oopsie. http://qi-hw.com/p/ben-blinkenlights/0ec7bb4 2011-02-01 21:46 [commit] Werner Almesberger: uart: added more values to schematics, added files for BOM processing http://qi-hw.com/p/ben-blinkenlights/5d7c78e 2011-02-01 21:47 wonders how much it would cost him to do a run of qty 10 pcbs using one of the many low qty fast turnaround pcb shops 2011-02-01 21:47 http://pastebin.com/wXFvq4MU 2011-02-01 21:48 rjeffries: quite a few should have online quotes 2011-02-01 21:49 wpwrak I assume design is simple enough that you have high confidence PCB is sound and you have built a PROOF OF CONCEPT** first article 2011-02-01 21:49 wolfspraul ** saud in ALL CAPS just for you my friend 2011-02-01 21:49 s/saud/said 2011-02-01 21:50 wpwrak so the pcb thickness is what? and what are outside dimensions (you know off top of your head) 2011-02-01 21:50 rjeffries: which project are you talking about ? 2011-02-01 21:51 0.8 mm thickness 2011-02-01 21:51 uart for Ben 2011-02-01 21:51 what else is there> ;))) 2011-02-01 21:51 oh. a lot :) 2011-02-01 21:51 yes, i built a proof of concept :) 2011-02-01 21:51 I know that I am KIDDING 2011-02-01 21:52 you will have to answer to wolfspraul for doing PROOF OF CONCEPT since that terms lack precision 2011-02-01 21:52 outside dimensions: 25.5 x 13.7 mm 2011-02-01 21:53 to get a quoute I guess I need to know number of vias and the (what is it called) line pitch? this is not a highly critical board I assume 2011-02-01 21:54 0.45 mm for the finest-pitch component (a QFN). the small passives are 0402 or larger. 2011-02-01 21:54 traces: see Design Rules in pcbnew. 2011-02-01 21:55 ok on wiki or is that in git 2011-02-01 21:55 vias: see File > Fabrication Outputs > Drill File 2011-02-01 21:55 where is my starting directory URL pls 2011-02-01 21:55 you need to check out the ben-blinkenlights project, cd uart, make brd 2011-02-01 21:56 check out as in install git then check out files right 2011-02-01 21:56 http://projects.qi-hardware.com/ is where it ALL starts :) 2011-02-01 21:56 if you don't have git yet, yes :) 2011-02-01 21:56 ok I am newbie. and a work in progress 2011-02-01 21:56 and you need kicad, of course 2011-02-01 21:57 I met with a cool EE grad student today from a local university 2011-02-01 21:57 I guess I will document my steps as I start from scratch it may help someone in fure, or not 2011-02-01 21:57 s/fure/future 2011-02-01 21:57 that's always a good idea 2011-02-01 21:58 most people probably syaty with more knowledge than me 2011-02-01 21:58 the good news: I am not hoplessly stupid. and I am patient more or less 2011-02-01 21:58 s/syaty/start 2011-02-01 21:59 I am now going to do a first pass look at what it would take to fab some pcbs 2011-02-01 22:00 actually first I have a small work project to finish. when I get that done I'll do that "for fun"