2010-10-13 00:33 <cfy> xiangfu: i reflash debian,when i boot it
2010-10-13 00:34 <cfy> xiangfu: it stop at one step
2010-10-13 00:37 <cfy> xiangfu: why the log on the taobao is missing?
2010-10-13 00:38 <cfy> xiangfu: i have seen i have sell none?
2010-10-13 00:40 <xiangfu> cfy: what you mean "one step". OpenWrt screen come out?
2010-10-13 00:40 <cfy> xiangfu: no,the debian
2010-10-13 00:40 <cfy> xiangfu: i have reflash the uboot
2010-10-13 00:40 <xiangfu> cfy: hmm.. I can find out the the log inside the taobao account.
2010-10-13 00:40 <cfy> xiangfu: i guess the reset is the software button?
2010-10-13 00:40 <xiangfu> cfy: what you want do about taobao log?
2010-10-13 00:41 <cfy> xiangfu: yesterday someone ask me where to buy it
2010-10-13 00:41 <xiangfu> cfy: the "reset" hole (at the back of nanonote) is hardware.
2010-10-13 00:41 <cfy> xiangfu: i find your shop,but i found nothing about the sell log
2010-10-13 00:41 <cfy> xiangfu: i stop at:  Algorithmics/MIPS FPU Emulator v1.5
2010-10-13 00:42 <cfy> xiangfu: s/i/it/
2010-10-13 00:43 <cfy> xiangfu: oh?i know
2010-10-13 00:43 <cfy> xiangfu: do you know this step mean?
2010-10-13 00:44 <xiangfu> cfy: hmm.. don't why Taobao delete the log. too bad.
2010-10-13 00:45 <cfy> xiangfu: yes,so someone may not trust you.
2010-10-13 00:50 <xiangfu> cfy: which kernel and Debian rootfs you use?
2010-10-13 00:51 <cfy> xiangfu: http://pyneo.org/howto/debian/nano.html
2010-10-13 00:51 <cfy> http://pyneo.org/downloads/nano/openwrt-xburst-qi_lb60-uImage.bin
2010-10-13 00:51 <cfy> http://pyneo.org/downloads/nano/debian-lenny.ubi
2010-10-13 00:51 <cfy> this
2010-10-13 00:52 <xiangfu> cfy: checkout this: http://dating.taobao.com/q/6155834.htm?lo=9&w=%B3%C9%BD%BB%BC%C7%C2%BC+%C3%BB%D3%D0%C1%CB this is why there is no "sell log" anymore.
2010-10-13 00:52 <cfy> xiangfu: oh,that's bad
2010-10-13 00:58 <xiangfu> cfy: have you run "usbboot -c "nerase 0 4096 0 0""  are you sure you have follow those steps: http://pyneo.org/howto/debian/nano.html
2010-10-13 00:59 <cfy> xiangfu: i follow this
2010-10-13 00:59 <cfy> usbboot -c "boot"
2010-10-13 00:59 <cfy> usbboot -c "nprog 0 openwrt-xburst-u-boot.bin 0 0 -n"
2010-10-13 00:59 <cfy> usbboot -c "nprog 1024 openwrt-xburst-qi_lb60-uImage.bin 0 0 -n"
2010-10-13 00:59 <cfy> usbboot -c "nprog 2048 debian-lenny.ubi 0 0 -n"
2010-10-13 00:59 <cfy> but the uboot is bad,so i flash the uboot
2010-10-13 00:59 <cfy> xiangfu: i try it agian
2010-10-13 01:00 <xiangfu> cfy: you better erase the rootfs. before you reflash the rootfs.
2010-10-13 01:00 <cfy> xiangfu: oh,got it
2010-10-13 01:06 <cfy> xiangfu: you mean the 'reset' is the hardware?but booting is stop.but  now i press it but not work
2010-10-13 01:07 <cfy> restart my emacs
2010-10-13 01:09 <cfy> xiangfu: êý­5�†
2010-10-13 01:09 <xiangfu> cfy: I can sure the "RESET" hole is hardware reset. whenever you press the "RESET" , it's will reset the CPU.
2010-10-13 01:10 <cfy> xiangfu: ÇM(debian/¨£Ì6†reset¡Hœ?
2010-10-13 01:10 <cfy> xiangfu: ÇMa(debian/¨£Ì6†reset¡Hœ?
2010-10-13 01:11 <xiangfu> cfy: `(ÀH„reset?
2010-10-13 01:11 <cfy> xiangfu: 4
2010-10-13 01:12 <cfy> xiangfu: G*†°((usb bootÌF/reset_¡Í”
2010-10-13 01:14 <cfy> ÇåM/ïå
2010-10-13 01:14 <cfy> Í7'
2010-10-13 01:14 <cfy> xiangfu: 9؆uboot,(Í7kernel„'
2010-10-13 01:15 <cfy> Å’rootfs
2010-10-13 01:15 <xiangfu> cfy: yes.
2010-10-13 01:15 <cfy> usbboot -c "boot"
2010-10-13 01:15 <cfy> usbboot -c "nerase 16 4079 0 0"
2010-10-13 01:15 <cfy> usbboot -c "nprog 1024 openwrt-xburst-qi_lb60-uImage.bin 0 0 -n"
2010-10-13 01:15 <cfy> usbboot -c "nprog 2048 debian-lenny.ubi 0 0 -n"
2010-10-13 01:15 <cfy> Ù7�Õ}†
2010-10-13 01:50 <cfy> xiangfu: /¨Ø/a(
2010-10-13 01:50 <cfy> xiangfu: —†>†openwrt}†�(sd
2010-10-13 02:03 <wpwrak> kristianpaul: (non-commercial) that's just childish. "i'm not making any money with it, so nobody else should". they'll be sorry ever after when they grow up and realize that they've just prevented themselves from using the projects they contributed to.
2010-10-13 02:05 <wpwrak> kristianpaul: (N pF) you'll need more driver strength. e.g., an oscilloscope will add ~10-20 pF too.
2010-10-13 02:06 <wpwrak> kristianpaul: i'd recommend to make i as strong as you can. this may cause noise that distorts the RF reception, but you can probably worry about that later.
2010-10-13 02:33 <wpwrak> kristianpaul: i.e., if you have otherwise good reception, even a noisy RF circuit will pick up enough of a signal that you can do something useful with it. once that part is done, it should be relatively easy to adjust drive strength.
2010-10-13 02:34 <wolfspraul> wpwrak: nothing with non-commercial or no-derivative clauses can become part of qi
2010-10-13 02:34 <wolfspraul> I'm not sure whether it's written up somewhere or not, but we all agree on that, long time ago already
2010-10-13 02:34 <wpwrak> kristianpaul: (one way would of course be to just watch the digital signal with a decent scope. since the probe adds a significant capacitative load, the signal will be better after removing the probe)
2010-10-13 02:34 <wolfspraul> gotta run
2010-10-13 02:35 <wpwrak> wolfspraul: (nc/nd) makes sense
2010-10-13 03:50 <qi-bot> [commit] Werner Almesberger: schhist/gitsch2ps: removed redundant quotes in assignments. http://qi-hw.com/p/eda-tools/a1d1182
2010-10-13 04:57 <wpwrak> xiangfu: (getting fped ready for debian) nice work, thanks !
2010-10-13 04:58 <xiangfu> and Wolfgang in Ingenic Office now. :)
2010-10-13 04:59 <xiangfu> wpwrak: still working on that. hope I can fix the last problem today. running Depends .
2010-10-13 05:00 <wpwrak> xiangfu: ah yes, the list of dependencies is quite long :)
2010-10-13 05:01 <xiangfu> wpwrak: there are steps in debian.org how to find out the dependencies. I will work on that later. then let you know.
2010-10-13 05:03 <cfy> xiangfu: i still can't boot the debian
2010-10-13 05:03 <cfy> xiangfu: either from the nn,or the sd card
2010-10-13 05:05 <cfy> xiangfu: whats wrong with your blog?i can visit it
2010-10-13 05:25 <qwebirc97155> from where i can tap 3.3V from Nanonote ?
2010-10-13 05:32 <qwebirc97155> anybody here who can tell me the TP to get 3.3V
2010-10-13 05:47 <cfy> xiangfu: boot debian from sd card,i wait about 30s
2010-10-13 05:48 <cfy> xiangfu: but boot from the nn(debian),i wait more than 30s,but still stop at one step
2010-10-13 05:49 <cfy> i failed flash the debian or just booting debian on nand is just slow
2010-10-13 05:53 <cfy> xiangfu: ssh root@192.168.254.101
2010-10-13 05:53 <cfy> Read from socket failed: Connection reset by peer
2010-10-13 05:54 <cfy> i can't ssh to nn
2010-10-13 06:18 <cfy> the default nameserver  of debian on nn seems don't work in china
2010-10-13 06:18 <cfy> i use 8.8.8.8
2010-10-13 06:47 <kristianpaul> :O
2010-10-13 06:47 <kristianpaul> curios about xiangfu and Wolfgang meeting in Ingenic
2010-10-13 06:48 <kristianpaul> wpwrak: yeah i was reading about probe load and signal will be better indeed (when not seeing it from it), i hope found in the lab good quality probes  too :)
2010-10-13 06:58 <kristianpaul> methril_work: hey :)
2010-10-13 07:01 <methril_work> kristianpaul, hey!!
2010-10-13 07:02 <methril_work> how are you? I see you resolved the OpenOCD problems
2010-10-13 07:02 <methril_work> :)
2010-10-13 07:35 <wpwrak> qwebirc97155: you could use the micro-SD slot or get it directly from the pcb.
2010-10-13 07:35 <wpwrak> qwebirc97155: http://www.almesberger.net/misc/ben/idbg-v2-install.jpg
2010-10-13 07:35 <wpwrak> qwebirc97155: TP9, right next to the black GND line in the picture above
2010-10-13 07:36 <qwebirc97155> thankx
2010-10-13 09:33 <FrankBlues> waves
2010-10-13 09:50 <kristianpaul> methril: some of then , actually now i need ad support to the CPLD
2010-10-13 09:50 <qi-bot> [commit] carlos: lm32 loader http://qi-hw.com/p/nn-usb-fpga/7b666c0
2010-10-13 10:35 <kristianpaul> What's the best way of creating files using Lib C/ANSI C?
2010-10-13 10:35 <kristianpaul> i guess stdio
2010-10-13 10:37 <kristianpaul> hmm
2010-10-13 10:37 <wpwrak> file = fopen("name", "w");
2010-10-13 10:37 <wpwrak> well, do you just want to create it or also write to it ?
2010-10-13 10:38 <kristianpaul> both
2010-10-13 10:38 <kristianpaul> if no exist create then write
2010-10-13 10:39 <kristianpaul> btw reading unix design principles it said that avoid uses binary formats
2010-10-13 10:40 <wpwrak> that's a good practice, yes
2010-10-13 10:41 <wpwrak> (create+write) fopen is what you want
2010-10-13 10:41 <kristianpaul> i ok
2010-10-13 10:41 <kristianpaul> :)
2010-10-13 13:32 <kristianpaul> hmm
2010-10-13 13:33 <kristianpaul> the sd-like memory will put me away from IO bottleneck
2010-10-13 13:33 <kristianpaul> :D
2010-10-13 13:41 <kristianpaul> woo this projetc is really moving on documentation http://www.gps-sdr.com/wiki/gps-sdr/Acquisition
2010-10-13 13:42 <kristianpaul> This channel is getting so quite as some moths ago :/
2010-10-13 13:43 <kristianpaul> why the universe behave like a Wave in some aspects.. !
2010-10-13 14:23 <wpwrak> hmm, quiet ? :)
2010-10-13 14:23 <wpwrak> did you somehow miss the jlime/patent discussions ? :)
2010-10-13 14:27 <kyak> !seen uncloaded
2010-10-13 14:35 <kristianpaul> wpwrak: i try to ignore pantents discussion, remenber qi is free of patents :-)
2010-10-13 14:41 <kristianpaul> wpwrak: what is this #define    REG(n)    (*(volatile uint32_t *) (mem+(n)-GPIO_BASE)) ?
2010-10-13 14:43 <kristianpaul> why you stope usign the memory allocation fuction on  blinkenlight example?
2010-10-13 14:46 <wpwrak> that's an access to a register. mem is the pointer to the area where the GPIO registers were mapped into the process' address space. n is the register address, GPIO_BASE is the offset of the GPIO registers.
2010-10-13 14:47 <wpwrak> the cast turns this into an unsigned 32 bit integer. the volatile means that the compiler is not allowed to reorder writes, or to cache data
2010-10-13 14:47 <wpwrak> (mem alloc) erm, what do you mean ?
2010-10-13 14:47 <kristianpaul> malloc
2010-10-13 14:48 <wpwrak> where do you think there should be a malloc ?
2010-10-13 14:48 <kristianpaul> i dont
2010-10-13 14:48 <kristianpaul> you already got the pointer..
2010-10-13 14:49 <wpwrak> mmap allocates the address space. i don't need to malloc it.
2010-10-13 14:49 <wpwrak> (it's also address space where the memory doesn't come from the space malloc uses)
2010-10-13 14:49 <wpwrak> i.e., the underlying memory in this case are some of the memory-mapped SoC registers
2010-10-13 14:49 <kristianpaul> ahh yes sure i was confused
2010-10-13 14:51 <kristianpaul> yeah malloc is for when i want let said 12 ints like a pointer
2010-10-13 14:53 <kristianpaul> sory i tend to swap names :/
2010-10-13 15:25 <Greek_o_nikos> Do I have to be a developer to use the Ben Nanonote?
2010-10-13 15:30 <Greek_o_nikos> I don't expect anything from the device other than transferring text files to it and reading them.
2010-10-13 15:31 <bartbes> well, why would you have to be a developer?
2010-10-13 15:32 <Greek_o_nikos> bartbes: ok, that explains it. Thanks for answering my question.
2010-10-13 15:43 <qbject> Wow. I'm surprised ever time I get the qwebirc captcha right.
2010-10-13 15:55 <kristianpaul> Greek_o_nikos: you dont, actually if you are no way related with development, your comments about the nanontoe are very helpfull
2010-10-13 16:18 <qi-bot> [commit] Ayla: The selector filters will now match also the files with an extension in uppercase. http://qi-hw.com/p/gmenu2x/5cd92b7
2010-10-13 16:18 <qi-bot> [commit] Ayla: When adding a new link, the default brightness is now -1. http://qi-hw.com/p/gmenu2x/69c702f
2010-10-13 17:35 <qi-bot> [commit] Neil Stockbridge: There is now a tool for creating un-fuzzy fonts http://qi-hw.com/p/setfont2/ecd17dc
2010-10-13 17:41 <qi-bot> [commit] Neil Stockbridge: There are now two example Pre fonts http://qi-hw.com/p/setfont2/267d166
2010-10-13 18:36 <qbject> djbclark: do you have any plans to sell replacement batteries for BNN?
2010-10-13 21:31 <kristianpaul> http://xiph.org/video/vid1.shtml
2010-10-13 21:33 <kristianpaul> MOstly OT^
2010-10-13 21:46 <kristianpaul> hmm may be video part can give clues for his repdrocution in the nanonote using free-of-patent software
2010-10-13 21:54 <kristianpaul> 4:2:0 !